Husqvarna TC 250 2010 Workshop Manual page 129

- To facilitate assembly, mark the position of the gear shift pedal (1) on the shaft.
Remove the retaining screw (2) of the gear shift pedal (1) (8 mm wrench)
and slide the pedal from the selector shaft.
- Remove the selector shaft (3) from the right-hand side.
- Remove the two screws (4) (4 mm Allen wrench and 8 mm wrench) secur-
ing the selector retaining plate (5) and remove retaining plate and ratchet
mechanism (6).
Part. no. 8000 H1489 (10-2009)
ENGINE DISASSEMBLY
F.31