Crankcase Disassembly - Husqvarna TC 250 2010 Workshop Manual

FIG. "A"
a1= 6x60 mm
a2= 6x55 mm
a3= 6x70 mm
a4= 6x90 mm
ENGINE DISASSEMBLY

Crankcase disassembly

- Remove the nine screws (1) from the left crankcase (2) (8 mm wrench).
Important: the screws (1) are not all the same length. Refer to figure
"A" on assembly to ensure correct installation.
F.34 Part. no. 8000 H1489 (10-2009)