Husqvarna TC 250 2010 Workshop Manual page 375

"KIT" INSTALLATION INSTRUCTIONS
Finally, secure the number plate holder to the support as shown in the figure.
1 - Number plate holder (1 piece)
2 - M5x16 mm screw (2 pieces)
3 - Bushing (2 pieces)
4 - Ø5.3xØ15x1 mm washer (2 pieces)
5 - M5 nut (2 pieces)
6 - Reflector (1 piece)
7 - Ø4.3xØ12x0.8 mm washer (2 pieces)
8 - M4 nut (2 pieces)
Part. N. 8000 H1489 (10-2009) O.15