Husqvarna TC 250 2010 Workshop Manual page 185

Output shaft (6 SPEED)
Fit the roller cage (1).
Fit 2nd gear (2), washer (3) and retaining ring (4).
Fit 6th gear (5) and retaining ring (6).
Fit the washer (7).
Fit roller cage (8) and 3rd gear (9).
Fit washer (10) and 4th gear (11).
Fit washer (12) and retaining ring (13).
Apply "MOLYKOTE G-n plus" on the 4th gear (11).
Fit 5th gear (14) and washer (15).
Fit roller cage (16), 1st gear (17) and washer (18).
A: Control dimension with 1st gear engaged and 1st gear butted up on the
shaft.
B: Control dimension with 4th gear engaged and 4th gear butted up against
shaft, washer and circlip.
C: Control dimension with 3rd gear engaged and 1st and 3rd gears and their
washers and circlips butted up together on the shaft.
D: Control dimension with 2nd gear engaged and 2nd and 1st gears butted up
together on the shaft.
Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
(2.6502 - 2.6981 in.)
(2.2549 - 2.2953 in.)
H.23
(1.0361 - 1.0705 in.)
(0.6376 - 0.6694 in.)