Cable Routing And Electrical Parts Installation Instructions (Tc); Ht Coil Position (Tc); Fuel Injection Control Unit Position (Tc); Securing Engine Stop Button Ground Cable To Chassis (Tc) - Husqvarna TC 250 2010 Workshop Manual

ELECTRICAL SYSTEM

Cable routing and electrical parts installation instructions (TC)

• HT coil position (1) (TC)
Connect the HT coil as shown in the figure.
• Fuel injection control unit position (2) (TC)
Electronic control unit installed with the flat side down.

• Securing engine stop button ground cable to chassis (TC)

The ground cable of the engine stop button is secured to the coil screw (3).
M.40 Part. N. 8000 H1489 (10-2009)