(Tps: Throttle Position Sensor) (Tc) - Husqvarna TC 250 2010 Workshop Manual

A Giallo
B Nero
ELECTRICAL SYSTEM
Carburettor throttle position sensor inspection

(TPS: Throttle Position Sensor) (TC)

Set the meter to the "Ohm" scale and disconnect the carburettor sensor connec-
tor (1) from the main wiring harness. Connect the meter probes to the terminals
of the YELLOW (A) and BLACK (B) wires and check that your readings match
the values given in the table.
a throttle twistgrip CLOSED
b throttle twistgrip
FULLY OPEN
"KEIHIN" MX 37- MX 41
M.28
890-990
3.4-4.4 K +/- 5%
Part. N. 8000 H1489 (10-2009)