Husqvarna TC 250 2010 Workshop Manual page 92

TE-TXC
27
28
GENERAL PROCEDURES
- Loosen the three screws (22) and remove the clutch actuator (23).
(TC)
- Remove the clip (24) that holds clutch hose and wiring harness together.
- Disconnect the connector (25) that connects wiring harness (26) to control
unit.
(TE-TXC)
- Remove the water temperature sensor connector (27).
- Remove the ground cables (28).
H00674
E.26 Part. N. 8000 H1489 (10-2009)