Filter And Drain Plug; Oil Feed Hose Installation - Husqvarna TC 250 2010 Workshop Manual

ENGINE REASSEMBLY

Filter and drain plug

Fit the oil filter (1) and tighten the cap (2) into place with its gasket using a 12
mm wrench (25 Nm, 2.5 Kgm, 18.44 ft/lb).

Oil feed hose installation

Refit the hose (1) and tighten the drilled screws (2) with their seals using a 12
mm wrench (8 Nm, 0.8 Kgm, 5.9 ft/lb).
H.56 Part. N. 8000 H1489 (10-2009)