Front Brake Disc; Disc Inspection; Brake Disc Replacement - Gilera SMT RCR 633793 Service Station Manual

Braking system

Front brake disc

Brake disc replacement

- Remove the front wheel operating on the axle
locking screw and on the wheel axle nut as shown
in the photograph.
- Undo the six disc retainer.
- Upon refitting, position the disc correctly making
sure that it rotates in the right direction.
Locking torques (N*m)
Front brake disc
10 ÷ 12 Nm *

Disc Inspection

- Remove the wheel and check for unevenness of
the disc. Maximum permissible out of true is 0.1
mm. If the value measured is greater, replace the
disc and repeat the check.
- If the problem persists, check and replace the
wheel rim if necessary.
BRAK SYS - 94
SMT RCR