Fuel Tank; Front Mudguard; Radiator Fan; Radiator Removal - Gilera SMT RCR 633793 Service Station Manual

SMT RCR

Fuel tank

- Remove the saddle
- Remove the front fairing halves
- Remove the mixer oil reservoir
- Remove the metal clamp fixing the reservoir by
operating on the two screws indicated in the pho-
tograph
- Remove the electrical cable harness of the low
fuel sensor
- Remove the fuel pipe and the low-fuel intake pipe
from the cock
- Slide off the fuel tank from its seat

Front mudguard

- Remove the 4 screws shown in the figure, the
transmission clamps and the mudguard

Radiator fan

Radiator removal

- Remove the front fairing
- Remove the radiator clamp indicated in the pho-
tograph
- Using the specific pliers, disconnect the coolant
pipes
WARNING
CARRY OUT THESE OPERATIONS WHEN THE ENGINE IS
COLD. SCALDING COOLANT OR ITS VAPOURS CAN
CAUSE SERIOUS BURNS. COLLECT THE COOLANT IN A
CONTAINER. COOLANT IS HARMFUL. AVOID CONTACT
WITH THE SKIN AND EYES.
Specific tooling
020544y Pliers for clamps
Radiator fitting
Chassis
CHAS - 111