Gilera SMT RCR 633793 Service Station Manual page 51

SMT RCR
- Remove the exhaust pipe and the silencer.
- Remove the cooling rubber pipe connecting the
water pump to the radiator.
- Get a container to collect the coolant.
- Remove the following electric wires:
•
the cable harness connecting the fly-
wheel to the coil
•
the cable harness of the coolant sensor
•
the HV cable
- Remove the carburettor:
•
Remove the low-pressure pipe control-
ling the fuel pump
•
Remove the fuel hose
•
Remove the mixer oil hose
Engine from vehicle
ENG VE - 51