Gilera SMT RCR 633793 Service Station Manual page 52

Engine from vehicle
- Remove the cable from the clutch lever.
- Before removing the cable, fully loosen the set
screw of the lever-hand grip unit.
- Remove the oil pump cover and disconnect the
metal cable and the hose connecting the oil res-
ervoir to the mixer.
- Remove the protective platen from the gearbox
and the kick start pedal.
- Drain the oil out of the gearbox. The oil drainage
plug is located in the lower section of the crank-
case.
ENG VE - 52
SMT RCR