Hydraulic Pump Fitting - Gilera SMT RCR 633793 Service Station Manual

SMT RCR
Cooling system
- Detach the gasket (1)
- Undo the rotor screw (2)
- Unscrew the hydraulic pump rotor (3)
- Drain out all the oil from the engine
- Remove the crankcase right cover
- Remove the hydraulic pump shaft (1) and the
transmission pinion (2)
- As soon as there is the slightest indication of
coolant or oil leaking from the breather, replace the
gaskets of the hydraulic pump shaft
- Fit the new gaskets as shown in the next layout

Hydraulic pump fitting

COOL SYS - 103