Rear Brake Pedal; Throttle Grip; Front Brake Control - Gilera SMT 50 Manual

rear brake pedal (01_08)

The rear brake control pedal «2» is placed on the right part of the scooter, at engine
level. It must be activated gradually with the toe-end. Combination of the rear and front
brakes must be used, according to the needs: by doing so, braking will be more ef-
fective.
Consider also the conditions of the road! Particularly, if it is wet asphalt or with sand,
oil, etc.
01_08

Throttle grip (01_09)

Placed on the right side of the handlebar. When the hand grip «B» is turned towards
the driver, the carburettor valve will be opened.
01_09

Front brake control (01_10)

The front brake control «E» is placed on the right side of the handlebar. Be particularly
careful when using the front brake, apply softly and measure the power progressively,
according to surface conditions, to avoid blocking of the wheel.
01_10
12