Gilera SMT RCR 633793 Service Station Manual page 81

SMT RCR
Engine
- Remove the carburettor by releasing the clamps
on the inlet manifold and the bellows connected to
the air cleaner housing
- Remove the fuel pipe from the carburettor, the
mixer oil intake pipe and the fuel valve low-pres-
sure pipe
- Operating on the screw indicated in the photo-
graph, remove the throttle valve and its tapered pin
- Compress the throttle valve return spring
- Remove the safety cap in the throttle valve and
remove the throttle control cable from the valve
- Remove the starter fixing cotter by undoing the
screws indicated in the photograph
- Remove the starter control
ENG - 81