Lubrication; Oil Pump - Gilera SMT RCR 633793 Service Station Manual

SMT RCR
- Fit the hub (1) without interfering with the main
transmission gear. The hub should be aligned with
the main transmission gear (2), and then, after
manually turning the intermediate gear of the kick
starter (4), it should be aligned with the clutch hub
gear
- Fit the clutch hub washer
- Fit the hub, the star washer, the locking washer
and the fixing nut
- Lock the hub using the specific tool and tighten
the locking nut using the appropriate M17 wrench
- Fold the locking washer to secure the nut
- Lubricate the clutch plates with new oil
- Fit the transmission discs with the visible circle
on one of the clutch surfaces facing out
- Fit the clutch internal cover with the Gilera logo
in line with the visible notch on one of the clutch
hub teeth
- Fit the clutch springs and their fixing screws

Lubrication

Oil pump

Engine
ENG - 77