Gilera SMT RCR 633793 Service Station Manual page 89

SMT RCR
Suspensions
- Take out the hydraulic cartridge from the stem
upper part.
- Lock the fork leg in the vice being careful to use
two aluminium clamps to avoid scratching the fork
leg.
- Place a protection cloth on the fork leg edge and
remove the oil seal as indicated in the photograph.
- Always replace the oil seal upon refitting.
- Clean and degrease all the components of the
front suspension.
- Check all the parts related to the suspension.
- Check the guide bushings for wear. Replace
them if there are signs of wear on the surface.
- Check the guide bushings on the fork leg for
wear. Replace them if they show signs of abnormal
wear.
SUSP - 89