Engine
Flywheel and starting
Removing the flywheel magneto
- Remove the left rear cover
- Detach the gear pedal
- Undo the three fixing screws and remove the
crankcase left cover
- Lock the magneto flywheel with the aid of the
specific calliper spanner and remove the flywheel
fixing nut
Specific tooling
020565Y Flywheel lock calliper spanner
- Remove the rotor unit from the flywheel with the
aid of the specific flywheel extractor
Specific tooling
020581Y Flywheel extractor
- Detach the fittings of the flywheel cable and the
brackets fixing the cables to the chassis
ENG - 56
SMT RCR