Kyocera KM-C2525E Service Manual page 134

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Checking copy counts by paper feed locations
U901
Description
Displays copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
Display
BYPASS
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
DUPLEX
When an optional paper feed device is not installed, the corresponding count is not displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing finisher punch count
U902
Description
Sets the punch limit and displays and clears the punch-hole scrap count when optional 3000-sheet finisher is
installed.
Purpose
Sets the punch limit to notify the user of the time to collect punch-hole scrap. Also, used to manually clear the
punch-hole scrap count if a message requiring collection of punch-hole scrap is shown on the touch panel
after collection. If punch-hole scrap is collected with the machine power turned off, the punch-hole scrap count
is not cleared and consequently this problem occurs.
Setting
1. Press the start key.
2. Select the item.
3. Change the value using the numeric keys.
Display
PUNCH LIMIT
PUNCH COUNT
4. Press the start key. The value is set.
Clearing
1. Press the reset key.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is dis-
played.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-94
Description
Description
MP tray
Cassette 1
Cassette 2
Cassette 3 (optional 3000-sheet paper feeder or paper feeder)
Cassette 4 (optional paper feeder)
Duplex unit
Description
Punch limit (maximum number of punching times)
Punch-hole scrap count (current number of punching
times)
Setting range
0 to 9999000
0 to 9999999