Kyocera KM-C2525E Service Manual page 92

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Checking the developing drive time
U157
Description
Displays the developing drive time for checking a figure, which is used as a reference when correcting the
toner control.
Purpose
To check the developing drive time after replacing the developing unit.
Method
Press the start key. The developing drive time of each color is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking the developing count
U158
Description
Displays the developing count for checking.
Purpose
To check the developing count after replacement of the developing unit.
Method
Press the start key. The current developing counts are displayed for each color.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the fuser control temperature
U161
Description
Changes the fuser control temperature.
Purpose
Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a
fuser problem on thick paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the cursor up/down keys.
Display
Ready Temp.
Stable (Driving)
Stable (Stop)
Temp. Print Full
Shift Print Dup
P. Roller Temp.
Supplement
While this maintenance item is being executed, the copy of whole surface black can be outputted in the inter-
rupt copying mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-52
Description
Description
Standby temperature control
Stabilized temperature during operation
Stabilized temperature under suspension
Temperature control during printing
Temperature control during duplex-printing
Press roller control temperature
Default
Setting range
setting
50 to 200 160
130 to 200 170
130 to 200 170
130 to 200 170
-100 to 100 0
130 to 200 150