Kyocera KM-C2525E Service Manual page 330

Adjusting
Item
order
Adjusting magnification of the
scanner in the auxiliary scanning
11
direction (scanning adjustment)
Adjusting the center line (scanning
adjustment)
12
Adjusting the leading edge registra-
tion (scanning adjustment)
13
Adjusting the leading edge margin
(scanning adjustment)
14
Adjusting the trailing edge margin
(scanning adjustment)
15
Adjusting the left and right margins
(scanning adjustment)
16
When maintenance item U076 (Adjusting the DP automatically) is run using the specified original (P/N 2AC68241),
the following adjustments are automatically made:
Adjusting the DP magnification (U070)
Adjusting the DP scanning timing (U071)
Adjusting the DP center line (U072)
Image Description
Original scanning speed
Adjusting the original scan data
(image adjustment)
Original scan start timing
Adjusting the original scan data
(image adjustment)
Adjusting the original scan data
(image adjustment)
Adjusting the original scan data
(image adjustment)
Maintenance mode
Original
Item No. Mode
U065 SUB SCAN ADJ Test chart
U070 -
U067 ADJUST DATA Test chart
ADJUST DATA2
U072 DATA(simplex)
DATA(duplex 1)
DATA(duplex 2)
U066 ADJUST DATA Test chart
ADJUST DATA2
U071 ADJUST DATA1
U403 B MARGIN Test chart
U404 B MARGIN
U403 D MARGIN Test chart
U404 D MARGIN
U403 A MARGIN Test chart
C MARGIN
U404 A MARGIN
C MARGIN
Image quality
Item
100% magnification Machine: ±0.8%
Using DP: ±1.5%
Enlargement/reduction Machine: ±1.0%
Using DP: ±1.5%
Lateral squareness Machine: ±1.5 mm/375 mm
Using DP: ±2.5 mm/375 mm
Margins A: 4.0 mm or less
B: 4.0 mm or less
C: 4.0 mm or less
D: 4.0 mm or less
Leading edge registration Cassette: ±2.5 mm
MP tray: ±2.5 mm
Duplex copying: ±2.5 mm
Skewed paper feed Cassette: 1.5 mm or less
(left-right difference) MP tray: 1.5 mm or less
Duplex copying: 2.0 mm or less
Lateral image shifting Cassette: ±2.0 mm
MP tray: ±2.0 mm
Duplex mode: ±3.0 mm
Page Remarks
P.1-3-22 U065: For copying an original placed on
the contact glass
P.1-3-26 U070: For copying originals from the DP.
P.1-3-24 U067: For copying an original placed on
the contact glass
To make an adjustment for rotate copying, select
ADJUST DATA2.
P.1-3-28 U072: For copying originals from the DP.
To make an adjustment for duplex copying, select
DATA(duplex 1) or DATA(duplex 2).
P.1-3-23 U066: For copying an original placed on
the contact glass
P.1-3-27 To make an adjustment for rotate copying, select
ADJUST DATA2.
U071: For copying originals from the DP.
P.1-3-77 U403: For copying an original placed on
the contact glass
P.1-3-78 U404: For copying originals from the DP.
P.1-3-77 U403: For copying an original placed on
the contact glass
P.1-3-78 U404: For copying originals from the DP.
P.1-3-77 U403: For copying an original placed on
the contact glass
P.1-3-78 U404: For copying originals from the DP.
Specifications
2JL/2JJ/2JG/2JD-1
2-4-8