Kyocera KM-C2525E Service Manual page 326

2JL/2JJ/2JG/2JD
Maintenance
Section
part/location
Optical Slit glass
section
Contact glass
Contact glass
Mirror 1
Mirror 2 and mirror 3
Lens
Exposure lamp
Optical rail
Original size detection
sensor
Maintenance
Section
part/location
Transfer Transfer belt unit
section
Transfer roller
Maintenance
Section
part/location
Developing Developing unit BK
section
Developing unit Y
Developing unit C
Developing unit M
2-4-4
Maintenance
Method
cycle
Clean Every 300,000
counts
Clean Every 300,000
counts
Clean User call
Clean User call
Clean User call
Clean User call
Check or User call
replace
Grease User call
Check or User call
clean
Maintenance
Method
cycle
Replace Every 300,000
counts
Replace Every 300,000
counts
Maintenance
Method
cycle
Replace Every 300,000
counts
Replace Every 300,000
counts
Replace Every 300,000
counts
Replace Every 300,000
counts
Points and cautions
Clean with a dry cloth or alcohol (do
not clean with a wet cloth).
Clean with alcohol and then a dry
cloth.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the print image.
Clean with a dry cloth and then air
blow only if vertical black lines
appear on the print image.
Clean with a dry cloth and then air
blow only if vertical black lines
appear on the print image.
Clean with a dry cloth and then air
blow only if vertical black lines
appear on the print image.
Replace if an image problem
occurs.
Check noise and shifting and then
apply scanner rail grease PG-671.
Clean the sensor emitter and sensor
receiver with alcohol or a dry cloth
only if there is a problem.
Points and cautions
Points and cautions
Page
P.1-5-8
Page
P.1-5-27
P.1-5-28
Page
P.1-5-25
P.1-5-25
P.1-5-25
P.1-5-25