Kyocera KM-C2525E Service Manual page 136

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Checking counts by optional devices
U905
Description
Displays the counts of optional DP or finisher.
Purpose
To check the use of optional DP and finisher.
Method
1. Press the start key.
2. Select the device, the count of which is to be checked. The count of the selected device is displayed.
DP
Display
ADP
RADP
FINISHER (3000-sheet document finisher or document finisher)
Display
CP CNT
STAPLE
PUNCH
STACK
SADDLE
When installing the document finisher, value of CP CNT and STAPLE are displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Resetting partial operation control
U906
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the cassettes or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press [EXECUTE].
3. Press the start key to reset partial operation control
[EXECUTE] display flashes during resetting.
4. Turn the main power switch off and on.
1-3-96
Description
Description
Number of single-sided originals that has passed through the DP
Number of double-sided originals that has passed through the DP
Description
Number of copies that has passed
Frequency the stapler has been activated
Frequency the punch has been activated
Frequency the stacker has been activated
Frequency the center holding has been activated