Kyocera KM-C2525E Service Manual page 119

Maintenance
item No.
Adjusting the leading edge registration for memory image printing
U407
Description
Adjusts the leading edge registration during memory copying.
Purpose
Make the following adjustment if there is a regular error between the leading edge of the copy image on the
front face and that on the reverse face during duplex switchback copying.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U034
(P.1-3-13)
U404
(P.1-3-78)
Adjustment
1. Press the start key.
Description
Leading edge registration for memory image
printing
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the cursor up/down keys.
For copy example 1, decrease the value.
For copy example 2, increase the value.
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U402 U066
(P.1-3-76) (P.1-3-23)
U407
Image on
front face
Description
U403
(P.1-3-77)
Setting
range
-2.0 to 2.0
Copy Copy
example 1 example 2
Figure 1-3-22
2JL/2JJ/2JG/2JD-1
U071
(P.1-3-27)
Initial Change in
setting value per step
2.0 0.1 mm
1-3-79