Kyocera KM-C2525E Service Manual page 260

2JL/2JJ/2JG/2JD
(2) Detaching and refitting the transfer roller
Follow the procedure below to replace the transfer roller.
Procedure
1. Open left cover 1 and paper conveying unit.
2. Using a flat-blade screwdriver, remove the
left transfer guide by prying the protrusion
off the hole.
3. Remove the transfer roller while pressing
down the stopper of both ends.
1-5-28
Left transfer guide
Groove
Figure 1-5-59
Stopper
Transfer roller
Figure 1-5-60
Flat-blade
screwdriver
Projection
Stopper