Kyocera KM-C2525E Service Manual page 94

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Initializing the touch panel
U201
Description
Automatically correct the positions of the X- and Y-axes of the touch panel.
Purpose
To automatically correct the display positions on the touch panel after it is replaced.
Method
1. Press the start key. The + key displayed at the upper left of the touch panel flashes.
2. Press on the center of the + key. The + key on lower right flashes.
3. Press the center of the flashing +.
Initialization of the touch panel is complete, and the screen for selecting a maintenance item No. is dis-
played.
Completion
Press the stop/clear key. The screen for selecting a maintenance mode No. is displayed.
Setting the KMAS host monitoring system
U202
Description
Initializes or operates the KMAS host monitoring system.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
Operating the DP separately
U203
Description
Simulates the original conveying operation separately in the optional DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated. The operation starts.
Display
ADP
RADP
ADP (NON P)
RADP (NON P)
4. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops.
The screen for selecting a maintenance item No. is displayed.
Setting the presence or absence of a key card or key counter
U204
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Setting
1. Press the start key.
2. Select the optional counter to be installed.
Display
KEY-CARD
KEY-COUNTER
3. Press the start key. The setting is set and the screen for selecting a maintenance item No. is displayed.
4. Turn the main power switch off and on.
1-3-54
Description
Description
With paper, single-sided original
With paper, double-sided original
Without paper, single-sided original (continuous operation)
Without paper, double-sided original (continuous operation)
Description
The key card is installed.
The key counter is installed.