Kyocera KM-C2525E Service Manual page 124

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Setting the ID correction operation
U464
Description
Turns ID correction on or off. Also, this determines the duration of ID correction and the timing of ID correction
during printing. Also, this allows individual settings for ID correction operation by enabling custom settings.
Purpose
To restrict ID correction when poor image quality is generated. Also, this allows individual settings for ID cor-
rection by enabling custom settings in setting the calibration cycle under the machine defaults depending on
the user preferences.
Start
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
Permission
Set Time Interval
Change Timing During
Print
Set Calibration Timing
Permission(50 Sheets)
Permission(Start/Sleep)
Permission(B/W)
Permission(AP/NearEnd)
Set Custum Mode
Setting: ID correction ON/OFF
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Interval time of correction
1. Change the setting value using the cursor up/down keys.
Description
Setting the interval time of ID correction
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting: Correction timing during printing
1. Change the setting value using the cursor up/down keys.
Display
TIMING
ADJUST DATA
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting: Timing for calibration
1. Select ON or OFF.
Display
Right After Finish Print
After Auto Clear Time
Initial setting: After Auto Clear Time
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
1-3-84
Description
Description
Setting to turn ID correction on/off
Setting for the interval of time between ID corrections after printing
Settings for the timing for initiating ID correction and the toner cover-
age during printing
Timing for ID correction after printing
Turning ID correction on/off after continuously printing 50 pages
Setting execution parameters for ID correction when powered up or
reverted from auto-sleep
Turning ID correction on/off in monochrome mode
Turning ID correction on/off when toner is added or running out
Turning custom settings on/off in setting the calibration cycle under
the machine defaults
Description
Turns ID correction ON
Turns ID correction OFF
Description
Timing for ID correction during printing
Print coverage at continuously printing
10 pages and 50 pages
Description
Performs ID correction as soon as printing has finished
Performs ID correction after printing has finished and the auto clear
time has timed out
Setting range Initial setting
0 to 9999 (s) 480
Setting range
0 to 10 (x 5 min.) 2 (10 min.)
0 to 100 (%)
Initial setting
20