Kyocera KM-C2525E Service Manual page 160

2JL/2JJ/2JG/2JD-1
Print list of fonts
Print a list of fonts for use as a quick guide during font
selection.
1. Press [Font].
2. Press [Internal].
If optional fonts other than internal fonts are
installed to the device, [Option] may also be
selected.
3. Press [Printing].
4. The status page is printed.
Copy quantity
Set number of pages to print from 1 - 999.
1. Press [Page Set].
2. Select [Copies] using the cursor up/down keys and
press [Change #].
3. Press [+] or [-] to set the number of copies.
4. Press [Close].
Print orientation setting
Set printing direction to [Portrait] or [Landscape].
Orientation can be separately configured for each inter-
face.
1. Press [Page Set].
2. Select [Orientation] using the cursor up/down keys
and press [Change #].
3. Press the interface to be configured.
4. Press [Portrait] or [Landscape].
5. Press [Close].
Setting page protect mode
When a [Print Overrun Press GO error occurs], Page
Protect Mode is forced to [On]. When this error occurs,
follow the steps below to reset to [Auto].
1. Press [Page Set].
2. Select [Page Protect] using the cursor up/down
keys and press [Change #].
3. Press [Auto].
4. Press [Close].
LF (line feed) action
Set the action to be performed by the device when a line
feed code (text code 0AH) is received.
1. Press [Page Set].
2. Select [LF Action] using the cursor up/down keys
and press [Change #].
3. Press the interface to be configured.
4. Select [LF only], [CR and LF] or [Ignore LF].
5. Press [Close].
1-3-120
CR (carriage return) action
Set the action to be performed by the device when a car-
riage return code (text code 0DH) is received.
1. Press [Page Set].
2. Select [CR Action] using the cursor up/down keys
and press [Change #].
3. Press the interface to be configured.
4. Select [CR only] [CR and LF] or [Ignore CR].
5. Press [Close].
Tone mode setting
Select from normal mode and fine mode.
1. Press [Print Quality].
2. Press [Change #].
3. Press [Normal] or [Fine].
4. Press [Close].
Setting color mode
Set whether to print status reports in color or in black and
white.
1. Press [Color Mode] ([Colour Mode]).
2. Press [Color] ([Colour]) or [Black&White] ([Black
White]).
3. Press [Close].
MP tray mode specification
Set the paper handling method for the MP Tray.
1. Press [Paper Handling].
2. Select [Multipurpose tray mode] using the cursor
up/down keys and press [Change #].
3. Press [Cassette] or [First].
4. Press [Close].
Feed select
Sets Feed Select. If a paper feed source is not specified
at the application (print driver), paper is fed from the
paper source configured here. In addition to the paper
cassettes and MP tray, you can set the optional paper
feeder or 3000 sheet paper feeder as the paper source.
1. Press [Paper Handling].
2. Select [Feed Select] using the cursor up/down keys
and press [Change #].
3. Press the desired Feed Select key.
4. Press [Close].
Duplex print mode configuration
Set the bind direction for the finished output for duplex
mode.
1. Press [Paper Handling].
2. Select [Duplex Mode] using the cursor up/down
keys and press [Change #].
3. Press [Off], [Short edge bind] or [Long edge bind].
4. Press [Close].