Kyocera KM-C2525E Service Manual page 287

(2) Secondary transfer/separation section
The secondary transfer/separation section consists mainly of the transfer (TC) roller and separation discharge plate.
A high voltage generated by the transfer high voltage PWB 2 (THVPWB2) is applied to the transfer (TC) roller for second-
ary transfer charging. Paper after secondary transfer is separated from the transfer (TC) roller by applying separation bias
that is output from the transfer high voltage PWB 2 (THVPWB2) to the separation discharge plate.
Separation
discharge plate
Transfer roller
Figure 2-1-17 Secondary transfer/separation section
(1) Transfer roller
(2) Left transfer guide
(3) Conveying guide
(4) Belt UP guide
(5) Discharge holder
(6) Separation discharge plate
Secondary transfer bias
Separation bias
Figure 2-1-18 Secondary transfer /separation section block diagram
Transfer belt
THVPWB2
SP_CONT
SEP_REM
T2_INV_CONT
T2_CONT
T2_REM
2JL/2JJ/2JG/2JD
EPWB
YC12-1
YC12-2
YC12-3
YC12-4
YC12-5
2-1-13