Kyocera KM-C2525E Service Manual page 67

Maintenance
item No.
Adjusting the DP scanning timing
U071
Description
Adjusts the DP original scanning timing.
Purpose
Make the adjustment if there is a regular error between the leading or trailing edges of the original and the
copy image when the optional DP is used.
Adjustment
1. Press the start key.
2. Select the item.
Display
ADJUST DATA1
ADJUST DATA2
3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
For copy example 1, increase the value of exp.1.
For copy example 2, decrease the value of exp.1.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U071
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
DP leading edge registration
DP trailing edge registration
Original
U404
(P.1-3-78)
Description
Setting
range
-32 to 32
-32 to 32
Copy Copy
example 1 example 2
Figure 1-3-10
2JL/2JJ/2JG/2JD-1
Initial Change in
setting value per step
0 0.19 mm
0 0.19 mm
1-3-27