Battery Removal - APRILIA ETV mille Workshop Manual

CHASSIS

7.1.7 BATTERY REMOVAL

Read 0.5.1 (GENERAL
INFORMATION) and 2.4 (BATTERY) carefully.
NOTE
When the battery is removed, the digital clock
and red line setting will be reset to zero.
See 2.3 (MULTIFUNCTION COMPUTER) for instructions
on how to set clock and red line.
!
Set the ignition switch to ≈
!
Remove the seat lower moulded cover, see 7.1.31
(REMOVING THE SEAT
COVER).
!
Release and remove the negative (-) terminal screw
(1).
!
Slide the negative lead (2) aside.
!
Lift the red protective cap (3).
!
Release and remove the positive (+) terminal screw
(4).
!
Slide the positive lead (5) aside.
WARNING
Do not pull on the wiring.
!
Release and remove the screw (6). Keep the nut (9)
and the bush (10).
Torque wrench setting for screw (6): 5 Nm
(0.5 kgm).
!
Raise the battery retaining bracket (7).
!
Grasp the battery (8) firmly and lift it out of its mount.
CAUTION
Once removed, the battery must be stored in a safe
place out of the reach of children.
WARNING
On refitting, connect the positive (+) lead first, then
the negative (-) lead.
NOTE
Replace the rubber section resting on the
battery if damaged.
7 - 12 -
00
PRECAUTIONS AND
∆.
LOWER MOULDED
6
3
4
5
ETV mille
2
1
8
7
10
9
Release 00/2004 - 04