Location Of Serial Numbers; Frame Number; Engine Number; Warnings Concerning Fuel, Lubricants, Coolant And Other Component Parts - APRILIA ETV mille Workshop Manual

Hide thumbs Also See for ETV mille:
Table of Contents

Advertisement

ETV mille

1.1 LOCATION OF SERIAL NUMBERS

These numbers are necessary for vehicle registration.
NOTE
Altering the identification numbers of vehicle or
engine is a legal offence punishable by heavy fines and
penalties. In addition, altering the frame number (VIN)
results in immediate warranty invalidation.

1.1.1 FRAME NUMBER

The frame number (Vehicle Identification Number) is
etched on the right-hand side of the headstock.

1.1.2 ENGINE NUMBER

The engine number is etched at the rear end of engine, in
the area near the sprocket.
1.2 WARNINGS CONCERNING FUEL,
LUBRICANTS, COOLANT AND OTHER
COMPONENT PARTS

1.2.1 FUEL

CAUTION
The fuel used to operate engines is highly flammable
and becomes explosive under particular conditions.
Refuelling and engine service should take place in a
well-ventilated area with the engine stopped.
Do not smoke when refuelling or in the proximity of
sources of fuel vapours.
Avoid contact with bare flames, sources of sparks or
any other source which may ignite the fuel or lead to
explosion.
Take care not to spill fuel out of the filler, or it may
ignite when in contact with hot engine parts.
In the event of accidental fuel spillage, make sure the
affected area is fully dry before starting the engine.
Fuel expands from heat and when left under direct
sunlight. Never fill the fuel tank up to the rim.
Tighten the filler cap securely after each refuelling.
Avoid contact with skin. Do not inhale vapours. Do
not swallow fuel. Do not transfer fuel between
different containers using a hose.
DO NOT RELEASE FUEL INTO THE ENVIRONMENT.
KEEP AWAY FROM CHILDREN.
Use only premium-grade unleaded fuel with a minimum
octane rating of 95 (N.O.R.M.) and 85 (N.O.M.M.).
Release 00/2004 - 04
GENERAL INFORMATION
1
- 3 -
00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents