Battery Removal - APRILIA tuono v4 Owner's Manual

Battery removal (04_06, 04_07)

•
Make sure that the ignition switch is set to "OFF".
•
Remove the rider saddle.
•
Unscrew and remove the two screws (1) using the spanner supplied in the
tool kit.
•
Remove the secondary fuse box (2).
•
Remove the battery retainer (3).
•
Undo and remove the screw (4) of the negative terminal (-).
•
Move the negative lead (5) aside.
•
Move the rubber cap that protects the positive clamp (+).
04_06
•
Undo and remove the screw (6) of the positive terminal (+).
•
Move the positive lead (7) aside.
PAY MAXIMUM ATTENTION AND PREVENT ALL CONTACT BETWEEN THE
BATTERY POLES AND ANY METAL OBJECT TO PREVENT THE RISK OF
SHORT-CIRCUITS.
04_07
•
Hold the battery (8) firmly and lift it out of its compartment.
•
Put the battery away on a level surface, in a cool and dry place.
•
Refit the rider saddle.
103