Removing The Rider Footpeg; Removing The Gear Shift Lever Assembly - APRILIA ETV mille Workshop Manual

CHASSIS

7.1.38 REMOVING THE RIDER FOOTPEG

Read 0.5.1 (GENERAL
INFORMATION) carefully.
!
Place the motorcycle on the stand.
CAUTION
Allow for the engine and exhaust silencer to cool
down completely.
!
Remove the retaining ring (1).
!
Withdraw the spindle (2).
!
Collect footpeg (3) and spring (4).
NOTE
Repeat the process to remove the other rider
footpeg if needed.
7.1.39 REMOVING THE
ASSEMBLY
WARNING
Mark lever and spindle before removal to ensure they
are refitted in the correct position on assembly.
!
Place the motorcycle on the centre stand.
!
Slacken the screw (1) and slide the gear shift lever (2)
off the spindle.
Torque wrench setting for screws (1): 10 Nm
(1.0 kgm).
7 - 38 -
00
PRECAUTIONS AND
GEAR SHIFT LEVER
2
4
1
1
2
Release 00/2004 - 04
ETV mille
3