ETV mille
7.1.8 REMOVING THE ENGINE CONTROL UNIT
Read 0.5.1
(GENERAL
INFORMATION) carefully.
!
Set the ignition switch to ≈
!
Remove
the
passenger
(RELEASING/LOCKING THE PASSENGER SEAT).
!
Disconnect the two connectors (1) from the Ecu (2).
WARNING
Make sure the two connectors (1) are properly fitted
to the matching connectors on assembly.
!
Release and remove the two screws (3).
Torque wrench setting for screws (3): 5 Nm
(0.5 kgm).
!
Lift and remove the Ecu (2) from the rider seat.
WARNING
Each time the Engine Control Unit (2) is replaced, the
throttle position sensor has to be set, see 4.10.3
(THROTTLE POSITION SENSOR).
Release 00/2004 - 04
PRECAUTIONS
AND
∆.
seat,
Read 7.1.1
1
2
3
3
CHASSIS
7
- 13 -
00