APRILIA ETV mille Workshop Manual page 118

ETV mille
!
Screw out the adjusting bushes (40 - 44) until bringing
them fully home in the frame.
Torque wrench setting for adjusting bushes (40 -
44): 10 Nm (1.0 kgm).
WARNING
On assembly, screw in the adjusting bushes (40 - 44)
manually until bringing them fully home in the engine
and then tighten to the specified torque.
!
Hold the check nut (38) steady. Release and remove
the screw (37).
!
Hold the check nut (41) steady. Release and remove
the screw (42).
!
Ensure that the slings (23) are taut.
!
Release and remove the two screws (45) and collect
the washers (46).
Torque wrench setting for screws (45): 50 Nm
(5.0 kgm).
!
Collect the two shims (11).
45
Release 00/2004 - 04
46
11
28
39
40
45
ENGINE
43
43
44
46
3
- 13 -
00