CHASSIS
7.1.45 OIL COOLER REMOVAL
Read 0.5.1
(GENERAL
INFORMATION) and 1.2.2 (ENGINE OIL) carefully.
!
Drain all engine oil, see 2.12 (ENGINE OIL AND
FILTER CHANGE).
NOTE
Make sure to have the special clip pliers (part
no. 0277295) ready at hand. Renew all clips using new
clips of the same type fitted originally on assembly.
!
Release the clips (2-3).
!
Withdraw the hoses (4-5).
!
Release and remove the three retaining screws (6).
Torque wrench setting for screws (6): 10 Nm
(1.0 kgm).
NOTE
Replace the seals if damaged.
!
Remove the oil cooler (1).
7.1.46 UPPER CHAIN GUARD REMOVAL
Read 0.5.1
(GENERAL
INFORMATION) carefully.
!
Place the motorcycle on the stand.
!
Release and remove the screw (1).
Torque wrench setting for screw (1): 5 Nm
(0.5 kgm).
!
Release and remove the two screws (2).
Torque wrench setting for screws (2): 5 Nm
(0.5 kgm).
!
Remove the chain guard (3).
7
- 44 -
00
PRECAUTIONS
AND
PRECAUTIONS
AND
4
1
5
3
2
ETV mille
2
6
3
6
1
2
Release 00/2004 - 04