Periodic Maintenance Chart - APRILIA ETV mille Workshop Manual

PERIODIC MAINTENANCE AND ADJUSTMENTS
ETV mille
Outlined in this section are the recommended procedures
for the periodic maintenance of the key components of
the motorcycle.
CAUTION
Before proceeding to maintain or inspect the
motorcycle, stop the engine and remove the ignition
switch key. Ensure that the engine and exhaust
system have cooled down. Wherever possible, place
the motorcycle on firm and level ground and lift it
using suitable equipment.
Be careful of any parts of the engine or exhaust
system which may still be hot. Contact with hot
engine or exhaust parts may cause severe burns.
All component parts of the vehicle are inedible.
Do not bite, suck, chew or swallow any vehicle parts.
Unless expressly specified otherwise, reassembly is
carried out by reversing the disassembly procedure.

2.1 PERIODIC MAINTENANCE CHART

In order to preserve the motorcycle in sleek running
order, aprilia recommends that you strictly observe the
periodic maintenance intervals recommended for the
different component parts.
1
WARNING
Upon reaching the first 1000 km (625 mi) and every
7500 km (4687 mi) afterwards, a wording "SERVICE"
(1) will appear on the right-hand display.
When this occurs, look up the periodic maintenance
chart and perform the required maintenance. Note
that motorcycles used in competition trials need to
be maintained more frequently, see 2.1.1 (PERIODIC
MAINTENANCE CHART).
2 - 4 -
00
Release 00/2004 - 04