How To Toggle Between Odometer/Trip Meter; Measurement Units (Km/Mi, L /Gal, °C/°F) - APRILIA ETV mille Workshop Manual

ETV mille
&
Set the ignition switch to "
button (3) repeatedly within the next three seconds to
try out the three light settings.
&
Select the desired lighting intensity.
2.3.4 HOW TO TOGGLE BETWEEN ODOMETER/
TRIP METER
Left-hand display
&
Press and release the SET button (1). The display will
toggle between odometer and trip meter mode, that is,
show the motorcycle's total mileage (in kilometres or
miles) or the distance covered since the trip meter was
last reset.
NOTE
Whenever the ignition switch is set to "
display will revert to odometer mode (total mileage).
The trip meter is reset to zero as follows:
&
Set display to trip meter mode (see above).
&
Hold down the SET button (1) for over three seconds
and all segments (2) will be reset to zero.
NOTE
The trip meter will reset automatically each time
the battery is removed from the vehicle.
2.3.5 MEASUREMENT UNITS (KM/MI, L /GAL, °C/°F)
WARNING
Measurement units such as km/mi, l /gal, °C/°F are
set at the factory depending on country of
destination. Factory setting cannot be modified.
Release 00/2004 - 04
PERIODIC MAINTENANCE AND ADJUSTMENTS
" and press the SET
", the
120 140
100
160
80
180
60
200
40
220
20 240
0
2
3
1
2
- 9 -
00