APRILIA ETV mille Workshop Manual page 289

CHASSIS
! Place the stanchion (8) in a vice with soft (aluminium)
jaws.
! Release and remove the capscrew (6) and collect the
copper washer (7).
! Extract the damping cylinder (9) complete with oil seal
(10), bush (11) and spring (12) from the slider (3).
NOTE
Replace the whole damping cylinder assembly
(9) if damaged. The only component that can be replaced
individually is the oil seal (10).
! Prise off the dust seal (13) using a flat-blade
screwdriver.
7 - 78 -
00
6
10
9
3
ETV mille
8
7
12
11
13
8
Release 00/2004 - 04