APRILIA ETV mille Workshop Manual page 290

ETV mille
! Use a thin screwdriver to prise off the retaining ring
(14) located inside the stanchion (8).
! Grasp the slider (3) and pull firmly to separate it from
the stanchion (8).
! The guide ring (15) acts as a stopper and will draw oil
seal (16), washer (17) and guide bush (18) out of the
stanchion (8) when it is extracted.
! Use a small screwdriver to take guide ring (15) and
guide bush (18) apart. This will release the washer (17)
and oil seal (16) from the slider (3).
Release 00/2004 - 04
16
CHASSIS
3
14
8
18
15
17
7 - 79 -
00