APRILIA ETV mille Workshop Manual page 97

PERIODIC MAINTENANCE AND ADJUSTMENTS
2.41 FASTENERS
Check and tighten as required after the first 1000 km
(625 mi) and every 7500 km (4687 mi) or 8 months
afterwards.
WARNING
The fasteners reported in the chart must be tightened
to the specified torque using a torque wrench and
applying LOCTITE where specified.
®
Safety-related items (
L243
Apply LOCTITE
L518
Apply LOCTITE
L572
Apply LOCTITE
L574
Apply LOCTITE
L648
Apply LOCTITE
man.
Manual fastening
Ingr. Grease underside
lub Lubrificate
sil Black silicone (part no. 8216005)
Vs For shear bolts
Olio Lubricate with oil (part no. 8116050)
cat Only for models with catalytic converter
nocat
Only for models w/o catalytic converter
Ing1
Lubricate with antiseize grease
Ing2
Lubricate with grease (part no. 8116053)
Description
Front mounting bolts
Upper and lower rear mounting bolts on left-hand side
Upper and lower rear mounting bolts on right-hand side of
adjuster bush
Upper and lower rear mounting bolts on right -hand side of
locknut
Upper and lower rear mounting bolts on right-hand side of
screw
Description
Engine oil inlet flange
Engine oil outlet flange
Sprocket to transmission output shaft
Clutch slave cylinder
Sprocket cover
2 - 62 -
00
) are in brackets.
KEY
® 243
®
518
® 572
® 574
® 648
Engine to frame
Parts installed to engine
ENGINE
Qty. Screw/nut
2+2 M10
2 M10
2 M20x1.5
2 M20x1.5
2 M10
Qty. Screw/nut
2 M6
2 M6
1 M10
3 M6
3 M6
ETV mille
Nm kgm Notes
50 5.0
50 5.0
6 0.6 Oil
50 5.0
50 5.0
Nm kgm Notes
10 1.0
10 1.0
50 5.0 L243
10 1.0
10 1.0
CONTINUED ➤
Release 00/2004 - 04