B.4.6.3 Print - Image Access WideTEK A2 Operation Manual

B.4.6.3 Print
Use this function to print the scanned image on the system printer.
After the scan sequence is finished a preview window opens as well as a second window
to select the desired printer.
All printers installed on the system can be found in this selection window.
After clicking the OK button the print starts.
The preview window can be closed when the print is finished.
Picture 63: Selecting the printer
B.4.6.4 Copy
This function copies the scanned image to a remote printer located in the network.
To enter the parameters of the printer click Options below the Copy button.
B.4.6.4.1 Printer Preset
Picture 64: Printer Preset
Page 60
Currently five printer presets are available.
To select a printer, click on the selection
button to open the list of the preset printers.
Click on the desired printer's name. All
printer parameters will be refreshed.
To change the preset name click on
Change Name. A window, see picture on
the left, opens. Place the cursor into the
field with the preset name. Enter the new
name and click the Close button.
Operation Manual