B.2.3.2 Activate The New Settings - Image Access WideTEK A2 Operation Manual

B.2.3.2 Activate the New Settings
Picture 20: Request to restart the scanner
After clicking the Reboot button the WideTEK A2 shows the following screen.
Picture 21: System Reboot message
Page 28
The modified
settings of the
network
parameters are
transmitted after
clicking the
Apply button.
After modifying
the parameters
the WideTEK A2
must be
restarted.
Click on the
button Reboot
to restart the
scanner.
After the restart
the unit is
accessible at the
new IP address.
Enter the new IP
address to
reconnect to the
scanner.
Operation Manual