B.9.2.5 Leaving The Adjustment Menu - Image Access WideTEK A2 Operation Manual

B.9.2.5 Leaving the Adjustment Menu
Click the S2N Scan2Net logo on top of the screen to return to the "Setup Device" screen
(Picture 76).
Click the "Scan Application" button to start scanning.
Notice:
Generally, there is NO reason to open the S2N Scan2Net scanner and work on the
hardware. However, should the device have been opened, it is strongly recommended to
execute the "Adjust Auto Focus" and the "X-Adjust" option after the scanner has been
reassembled.
Operation Manual Page 79