About this Manual
Operation Manual
All information about the normal operation and behavior of this device is found in this
Operation Manual. The manual is written for people who only operate the device and do
not perform setup and adjustment procedures.
All device elements and software functions are described in detail, although some of them
might never be used. This manual does not cover any application software. Refer to the
appropriate manual to learn about the application software.
Setup and Assembly Manual
The Setup and Assembly Manual is written for technical staff with some basic
mechanical as well as software skills. Many resellers will offer on-site installation;
therefore, large parts or all of the setup and assembly manual might not be of interest to
the reader.
The access level at which these setup and adjustment processes are performed is called
"Poweruser" and is password protected from access by the normal operator.
Both
manuals
can
http://service.imageaccess.de. Be sure to always check for the latest versions of these
manuals.
The manual is divided into four sections, A to D.
Section A
describes the hardware of the device. It shows the connectors as well as all
other elements of the device.
Section B
describes the operation software.
Section C
describes troubleshooting procedures and test scan generation.
Section D
shows all technical data and specific declarations, e.g. CE, FCC, UL.
© 2005 – 2008 by Image Access GmbH,
All rights reserved. Reproduction in whole or in part in any form or medium without express written
permission of Image Access is prohibited. Scan2Net™ and other designated brands herein are
trademarks of Image Access.
All other trademarks are the property of their respective owners.
Image Access reserves the right at any time without notice to change said product, product
specification and documentation. For the most recent version, always check our web site
www.imageaccess.de
or the customer service portal at
Page 4
be
downloaded
from
Germany.
our
customer
service
http://service.imageaccess.de
portal
at
Operation Manual
Need help?
Do you have a question about the WideTEK A2 and is the answer not in the manual?