Removing The Rear Cover (Riser Module 1) - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

9.5.1.5

Removing the rear cover (riser module 1)

Figure 95: Removing the rear cover
Ê Remove three screws (see circles).
Ê Remove the rear cover.
V
CAUTION!
Keep the rear cover for further use.
Always replace rear covers into unused installation locations to
comply with applicable EMC regulations and satisfy cooling
requirements.
RX2540 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
189