Applying Thermal Paste; Installing The Processor Heat Sink; Concluding Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

11.5.4.2 Applying thermal paste

Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
I
If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied
to its lower surface. In this case, please proceed with section
"Installing the heat sink" on page

11.5.4.3 Installing the processor heat sink

Ê Install the processor heat sink as described in sections
sink and processor" on page 309

11.5.5 Concluding steps

"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
RX2540 M1
314.
and
Upgrade and Maintenance Manual
310.
"Installing the heat sink" on page
Processors
"Preparing the heat
310.
313