Installing An Expansion Card In A Riser Module; Installing The Dummy Cover To Riser Module 2 (Hl) - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

9.5.3.3

Installing an expansion card in a riser module

Ê Install the expansion card as described in section
card in a riser module (HL)" on page
9.5.3.4

Installing the dummy cover to riser module 2 (HL)

Figure 103: Installing the dummy cover to riser module 2
Ê Position the dummy cover.
I
Make sure that the bracket of the riser card holder is positioned
outside the dummy cover (see closeup).
Ê Fasten the dummy cover with two screws (see circles).
RX2540 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing an expansion
187.
197