Removing Riser Module 2 (Fl); Preliminary Steps; Removing The Fbu - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
"Enabling BitLocker functionality" on page 92
Ê
9.6.4

Removing riser module 2 (FL)

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.6.4.1

Preliminary steps

Ê If applicable, "Locating the defective server" on page 51
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 53
Ê
Ê If applicable, remove all external cables from the expansion card to be
removed.
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê If applicable, disconnect internal cables from the GPGPU card.
9.6.4.2

Removing the FBU

Ê If applicable, remove the FBU as described in section
with the holder" on page
230
221.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
"Removing the FBU
RX2540 M1